Displaying items by tag: Heat Pump

Wednesday, 04 April 2012 12:59

Bryant - 280A

Standard Features

Energy Efficiency

  • Up to 20.5 SEER / 13.0 HSPF

Durability

  • DuraGuard™ protection package
  • Steel-louver coil guard
  • Solid, durable sheet metal construction

Sound

  • Sound level as low as 58 dBA

Comfort

  • Variable speed compressor with capacity range as wide as 40-100%
  • Air cooled Inverter variable speed drive
  • System required Evolution Control (SYSTXBBUID01-D or SYSTXBBUIZ01-D software version 23 or newer)

Reliability

  • High-pressure switch
  • Internal crankcase heater standard
  • Evolution Extreme Intelligence actively monitors critical system parameters
  • Electronic expansion valve (EXV) for heating
  • Suction pressure transducer
  • Filter drier and External muffler (field installed)

Flexibility and installation

  • 2 control wires to outdoor unit
  • Minimum and maximum airflow adjustments
  • Compressor heating RPM control

Applications/Serviceability

  • Long-line - up to 250 ft total equivalent length, up to 200 ft condenser above evaporator, or up to 80 ft evaporator above condenser

 

Published in Bryant
Monday, 02 April 2012 15:17

B&D Manufacturing-HSS Buffer Tank

    HSS® Series
      A NON-PRESSURIZED STAINLESS STEEL BUFFER TANK FOR HYDRONIC HEAT!

  •     Available Sizes: HSS-12, HSS-20, HSS-30, HSS-40, HSS-60, HSS-80
  •     1 1/4", 1 1/2" or 2" inlet & 3/4" or 1" ball valve outlets
  •     Water temperature not to exceed 150 degree max
  •     Designed for 6 to 10 gallons per ton of buffer volume
  •     115V pump on Hydronic Heat side
  •     230V pump with Water side
  •     Hydronic pump relay standard sensor for One Stage Heat, Two Stage Heat or Heating & Cooling built in
  •     Pump selection based on flow and foot of head per circuit
  •     Water side only 3 heat pump circuit max
  •     Hydronic 26/99-3 is a three speed pump (low-med-hi)
Published in B&D
Monday, 02 April 2012 15:10

B&D Manufacturing-QT-EA Flow Center

    QT-EA® Flow Center
      SPECIAL 2 CIRCUIT FLOW CENTER NOW AVAILABLE IN QT SERIES!


The QT-EA Flow Center is designed to provide long, reliable operation in an attractive cabinet, while providing installation and service benefits of the EA KFC. The stylish insulated cabinet provides flexible installation without feeling the need to hide it out of sight.

SIMPLE INSTALLATION
Because the QT-EA Flow Center is completely packaged at the factory, installation is simple. The system should be mounted on the floor. Simply connect a return line from the earth system to the QT-EA Flow Center. Then connect a supply line from the QT-EA to the heat pump unit. That's all there is to adding reliable pump protection to any closed-loop system. Also available is the Flowmeter Tool, an exclusive service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.




Published in B&D
Monday, 02 April 2012 15:07

B&D Manufacturing-QT Flow Center

    QT® Flow Center
      The QT Flow Center is designed to provide long, reliable operation in an attractive cabinet, while providing installation and service benefits of the GT Flow Center. The stylish rugged insulated cabinet provides for flexible installation without feeling the need to hide it out of sight. The QT Flow Centers are now standard equipment for geoexchange heating and cooling. The QT Flow Center is one of the greatest things to happen to the geoexchange industry.

ONE COMPLETE PACKAGE
The non-pressurized QT Flow Center pumping station is unlike other pump protection devices. For instance, the QT Flow Center includes a built-in pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti-freeze or water, while automatically eliminating air from the closed loop system.

SIMPLE INSTALLATION
As a result of the QT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the QT Flow Center, then connect a supply line from the QT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

The QT Flow Center is designed for years of operation!

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the QT Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.

Published in B&D
Monday, 02 April 2012 15:04

B&D Manufacturing-EA Flow Center

    Non-Pressurized GT® Flow Center
      THE PRODUCT THAT STARTED IT ALL!


We offer a patented product that has revolutionized the Geothermal world. This single item, the EA FLOW CENTER... made it all possible. From this simple idea arose one of the most remarkable products on the market today.

The patented EA package contains a water vessel with a self-sealing, removable screw-in top, an air-eliminating dip tube on the inlet, a pump protecting check valve on the outlet, pump(s), and ball valves that allow the pump(s) to be removed for service without loss of fluid to the closed loop system. When fluid is circulated through the canister, air is eliminated through the top of the chamber. When the self-sealing top is in place, the top of the chamber acts as an expansion tank. The top remains open until the system is completely filled and purged. Also note that if you are manifolding inside the EA will purge the system. If you plan to manifold outside, you must use a purge cart to clear lines.

Because the EA Flow Center is completely packaged at the factory, installation is simple. The system can be mounted on the floor or wall. Simply connect a return line from the earth System to the EA Flow Center. Then connect a supply line from the EA to the heat pump unit. That's all there is to adding reliable pump protection to any closed loop system. Also available is the Flowmeter Tool (look in accessories), an exclusive B & D Mfg., Inc. service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.

ONE COMPLETE PACKAGE
The non-pressurized GT Flow Center pumping station is unlike other pump protection devices. For instance, the GT Flow Center includes a built-in patented pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti- freeze or water, while automatically eliminating air from the closed-loop system.

SIMPLE INSTALLATION
As a result of the GT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the GT Flow Center, then connect a supply line from the GT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the EA Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.

Published in B&D
Monday, 02 April 2012 14:59

B&D Manufacturing-GT Flow Center

    Non-Pressurized GT® Flow Center
      THE PRODUCT THAT STARTED IT ALL!


We offer a patented product that has revolutionized the Geothermal world. This single item, the GT FLOW CENTER... made it all possible. From this simple idea arose one of the most remarkable products on the market today. The GT Flow Center is so easy to use that it has been selected for a High School Vocational School teaching program.

The patented GT package contains a water vessel with a self-sealing, removable screw-in top, an air-eliminating dip tube on the inlet, a pump protecting check valve on the outlet, pump(s), and ball valves that allow the pump(s) to be removed for service without loss of fluid to the closed loop system. When fluid is circulated through the canister, air is eliminated through the top of the chamber. When the self-sealing top is in place, the top of the chamber acts as an expansion tank. The top remains open until the system is completely filled and purged. Also note that if you are manifolding inside the GT will purge the system. If you plan to manifold outside, you must use a purge cart to clear lines.

Because the GT Flow Center is completely packaged at the factory, installation is simple. The system can be mounted on the floor or wall. Simply connect a return line from the earth System to the GT Flow Center. Then connect a supply line from the GT to the heat pump unit. That's all there is to adding reliable pump protection to any closed loop system. Also available is the Flowmeter Tool (look in accessories), an exclusive B & D Mfg., Inc. service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.

ONE COMPLETE PACKAGE
The non-pressurized GT Flow Center pumping station is unlike other pump protection devices. For instance, the GT Flow Center includes a built-in patented pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti- freeze or water, while automatically eliminating air from the closed-loop system.

SIMPLE INSTALLATION
As a result of the GT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the GT Flow Center, then connect a supply line from the GT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the GT Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.

Published in B&D

Water-Source Systems that Simultaneously Cool and Heat or provide Heat Pump Operation

W-Series units combine the convenience of water-source systems with VRFZ technology. These units are easily installed indoors, which means that system performance efficiency is independent of outdoor ambient temperatures. The W-Series includes WR2 models for simultaneous cooling and heating, and WY models as powerful heat pumps.

Now you can control temperature in every room, on every floor, in every building with Mitsubishi Electric’s CITY MULTI systems. It’s an innovative concept that is transforming the way the industry approaches building design, construction, and renovation; it’s based on the understanding that every building has its own unique characteristics and challenges. The CITY MULTI VRFZ building comfort solution gives you the freedom to customize a solution that fits your building like a tailored suit fits a person. As usage patterns and building requirements change, the systems can be adapted to fit these new needs.

W-Series systems from CITY MULTI use water as a heat exchange medium and are intended to be installed inside, rather than outside a building. Zone cooling and heating is controlled by refrigerant piped between water-source unit, BC controller (R2-Series) or manifold (Y-series) and indoor units. W-Series systems can be designed with a wide selection of indoor model configurations and controllers. Indoor units can be monitored and operated individually with remote controllers, up to 50 from one central controller, or up to 2,000 using the TG2000 software. And the CITY MULTI Controls Network (CMCN) integrates with LonWorks® and BACnet® for integrated systems control of the entire building.

Applications include multi-story office buildings, government buildings, military buildings, medical facilities, nursing homes, schools and universities, hotels, resorts, casinos and multi-family dwellings.

Double heat recovery
The double-heat recovery feature of the WR2-Series helps control energy that would normally be rejected to the atmosphere. First, within the system, energy is absorbed in units providing cooling. The energy is redirected by refrigerant to units that are in heating mode. Secondly, energy can be recovered between systems through the water loop. For example, a system providing primarily cooling is rejecting heat to the water loop. This energy could then be utilized by systems providing primarily heating.

Published in Mitsubishi
  • Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent):   Closed loop cooling EER - Up to 28.8;  Closed loop heating COP - Up to 4.6
  • Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
  • Optimal dehumidification capability with the Evolution Connex™ control
  • Insulated cabinet and compressor blanket for quiet operation
  • Wide operating temperature range with exceptional cold weather performance
  • Compatible with a wide range of furnaces and fan coils
  • 10-year parts and labor limited warranty1

OPTIONAL FEATURES

  • Supplemental, domestic hot water generation
 
1. To the original owner, when installed in a residence, a 10-year parts and labor limited warranty upon timely registration of equipment. Warranty period is 10 years on parts and 5 years on labor if not registered within 90 days of installation. Original owners residing in jurisdictions that prohibit warranty benefits conditioned on registration will automatically receive a 10-year parts and labor limited warranty. See warranty certificate for  details. 
Published in Bryant
  • Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent): Closed loop cooling EER - Up to 32.0; Closed loop heating COP - Up to 4.7
  • Enjoy the ultra-quiet performance and even-temperature comfort of variable-speed air delivery
  • Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
  • Superior summer dehumidification
  • Smart startup for smoother operation
  • Insulated cabinet and compressor blanket for quiet operation
  • Wide operating temperature range with exceptional cold weather performance
  • Corrosion-resistant coil for durability
  • 2" MERV 13 filtration
  • 10-year parts and labor limited warranty1

OPTIONAL FEATURES

  • Supplemental, domestic hot water generation
  • Internally-mounted auxiliary heat
1To the original owner, when installed in a residence, a 10-year parts and labor limited warranty upon timely registration of equipment. Warranty period is 10 years on parts and 5 years on labor if not registered within 90 days of installation. Original owners residing in jurisdictions that prohibit warranty benefits conditioned on registration will automatically receive a 10-year parts and labor limited warranty. See warranty certificate for details.
Published in Bryant
Sunday, 01 April 2012 16:10

Bosch CDi Series SM Split Model

The Greensource CDi Series SM Model geothermal heat pump split system comes in two parts that can individually replace and work with your existing HVAC system or both can be used in tandem for a full solution. Each come equipped with the quality and innovative technology that only Bosch can provide.

Greensource CDi Series SM Model | Split - Condensing Section

  • Versatile and compact design adapts to replacement, relocation, or new construction
  • Available hot water generator
  • Functional, stylish compact design
  • Standard 10 year limited warranty on all parts and labor
  • Two-stage scroll compressor operates in harmony with the earth’s temperature extending service life and saving you money
  • Advanced controls constantly monitor equipment for reliability and longevity
  • Engineered for noise free operation
  • Available in both outdoor and indoor models

Greensource CDi Series SM Model | Split - Air Handler Section

  • Adaptable for varying installation configurations
  • Capable of using 1” or 2” filters
  • Condensation overflow protection
  • Variable speed ECM blower motor for reduced noise and increased comfort
  • Standard 10 year limited warranty on all parts and labor
  • Adapts to most existing furnaces

Key Features:

  • Tin-Plated Evaporator Air Coil
  • Floating Base Pan
  • Closed-cell Foam Insulation
  • 2 Stage Compressor
  • Variable Speed CFM Motor
  • Filter Drier
  • Easy Access Filter Rack and 2” MERV-8 Filter
  • Sloped Stainless Steel Drain Pan
  • Thermal Expansion Valve (TXV)
  • Air Tight White Pre-painted Steel Cabinets
  • Low and High Pressure Switches
  • R410-A Refrigerant
  • Electronic Circuit Board with Unit Alerts
  • Brown Out Protection
  • Anti-Short Cycling
  • Water Coil/Coaxial Coil/Condenser Freeze Protection

Optional Features

  • Cupronickel coaxial heat exchanger
  • Internal electric heat
  • Dehumidification options
  • Domestic hot water heat recovery package
Published in Bosch
Page 8 of 9