Displaying items by tag: Heating and Cooling

Water-Source Systems that Simultaneously Cool and Heat or provide Heat Pump Operation

W-Series units combine the convenience of water-source systems with VRFZ technology. These units are easily installed indoors, which means that system performance efficiency is independent of outdoor ambient temperatures. The W-Series includes WR2 models for simultaneous cooling and heating, and WY models as powerful heat pumps.

Now you can control temperature in every room, on every floor, in every building with Mitsubishi Electric’s CITY MULTI systems. It’s an innovative concept that is transforming the way the industry approaches building design, construction, and renovation; it’s based on the understanding that every building has its own unique characteristics and challenges. The CITY MULTI VRFZ building comfort solution gives you the freedom to customize a solution that fits your building like a tailored suit fits a person. As usage patterns and building requirements change, the systems can be adapted to fit these new needs.

W-Series systems from CITY MULTI use water as a heat exchange medium and are intended to be installed inside, rather than outside a building. Zone cooling and heating is controlled by refrigerant piped between water-source unit, BC controller (R2-Series) or manifold (Y-series) and indoor units. W-Series systems can be designed with a wide selection of indoor model configurations and controllers. Indoor units can be monitored and operated individually with remote controllers, up to 50 from one central controller, or up to 2,000 using the TG2000 software. And the CITY MULTI Controls Network (CMCN) integrates with LonWorks® and BACnet® for integrated systems control of the entire building.

Applications include multi-story office buildings, government buildings, military buildings, medical facilities, nursing homes, schools and universities, hotels, resorts, casinos and multi-family dwellings.

Double heat recovery
The double-heat recovery feature of the WR2-Series helps control energy that would normally be rejected to the atmosphere. First, within the system, energy is absorbed in units providing cooling. The energy is redirected by refrigerant to units that are in heating mode. Secondly, energy can be recovered between systems through the water loop. For example, a system providing primarily cooling is rejecting heat to the water loop. This energy could then be utilized by systems providing primarily heating.

Published in Mitsubishi

Water-Source Systems that Simultaneously Cool and Heat or provide Heat Pump Operation

W-Series units combine the convenience of water-source systems with VRFZ technology. These units are easily installed indoors, which means that system performance efficiency is independent of outdoor ambient temperatures. The W-Series includes WR2 models for simultaneous cooling and heating, and WY models as powerful heat pumps.

Now you can control temperature in every room, on every floor, in every building with Mitsubishi Electric’s CITY MULTI systems. It’s an innovative concept that is transforming the way the industry approaches building design, construction, and renovation; it’s based on the understanding that every building has its own unique characteristics and challenges. The CITY MULTI VRFZ building comfort solution gives you the freedom to customize a solution that fits your building like a tailored suit fits a person. As usage patterns and building requirements change, the systems can be adapted to fit these new needs.

W-Series systems from CITY MULTI use water as a heat exchange medium and are intended to be installed inside, rather than outside a building. Zone cooling and heating is controlled by refrigerant piped between water-source unit, BC controller (R2-Series) or manifold (Y-series) and indoor units. W-Series systems can be designed with a wide selection of indoor model configurations and controllers. Indoor units can be monitored and operated individually with remote controllers, up to 50 from one central controller, or up to 2,000 using the TG2000 software. And the CITY MULTI Controls Network (CMCN) integrates with LonWorks® and BACnet® for integrated systems control of the entire building.

Applications include multi-story office buildings, government buildings, military buildings, medical facilities, nursing homes, schools and universities, hotels, resorts, casinos and multi-family dwellings.

Double heat recovery
The double-heat recovery feature of the WR2-Series helps control energy that would normally be rejected to the atmosphere. First, within the system, energy is absorbed in units providing cooling. The energy is redirected by refrigerant to units that are in heating mode. Secondly, energy can be recovered between systems through the water loop. For example, a system providing primarily cooling is rejecting heat to the water loop. This energy could then be utilized by systems providing primarily heating.

Published in Mitsubishi
Tuesday, 10 April 2012 16:06

Mitsubishi-Mr. Slim MSZ Series Heat Pump

Single-Room Wall-Mounted Heat Pump Lineup (cooling and heating)
(9000 to 33200 Btu/h)

  •     INVERTER-driven compressor
  •     Provides cooling and heating in a widerange of capacities
  •     Wireless remote controller
  •     WIDE Vane bottom for a wider angle of air flow, 150° fromleft to right (on GA24/D30/D36 models)
  •     Ideal for applications such as:    - Bedrooms, home offices, living rooms,dining rooms, bonus rooms, basements,kitchens, guard houses and more

        Easy Installation

  •         3” hole access to connect indoor unit with outdoor unit
  •         Indoor unit powered from three wires connected to outdoor unit
  •         Discreetly mounted high on a wall for out of sight comfort control
  •         Catechin and Anti-allergen enzyme filters for high air-purification capabilities
  •         “Powerful Mode” function permits system to temporarily run at a lower/higher temperaturewith an increased fan speed, which quickly brings the room to the optimum comfort level
  •         Self-check function with onboard diagnostics
  •         Advanced microprocessor control
  •         Auto restart following a power outage
  •         Wireless remote controller
Published in Mitsubishi
Tuesday, 10 April 2012 16:06

Mitsubishi-Mr. Slim P-Series Heat Pumps

Bringing Year-round Comfort Solutions to Extreme Climates
The cooling and heating success of Mitsubishi Electric’s INVERTER heat pump systems is well documented. Our Hyper-Heating INVERTER (H2i) P-Series technology advances the process a step further with the added benefit of year-round comfort with a single system even on the coldest days of the year in most areas. The 2.5- and 3-ton wall-mounted, ceiling-suspended, ceilingcassette and ducted indoor units connected to the H2i P-Series outdoor units are flexible enough to satisfy almost any light commercial or institutional renovation or new construction project.
The Next Generation in Heat Pump Technology
These H2i P-Series outdoor units give a new level of performance to Mitsubishi P-Series models, providing the extra heat-generating power it takes to deliver comfort and consistency in extreme climates. H2i units use Mitsubishi Electric’s INVERTER-driven scroll compressor technology to achieve the desired room temperature quickly, maintaining it consistently while simultaneously conserving energy. Plus with the integration of our exclusive H2i flash technology, these H2i P-Series units recover heat energy that is normally wasted in the flash process at the outdoor coil. This process helps the H2i system overcome issues commonly associated with conventional heat pumps such as decreases in low-side pressure, refrigerant mass flow rate and operational capacity. As a result, H2i P-Series units exhibit 100 percent of rated heating capacity at 5° F and 80 percent at -13° F outdoor ambient temperatures (see Figure 1). Plus they use R410A environmentally friendly refrigerant.

H2i P-Series heat pumps offer a variety of features designed to take the worry out of temperature control such as automatic restart in the case of power outages and automatic cool/heat changeover. And its long line length capabilities of up to 260 ft. expand application possibilities.

Sometimes cooling spaces such as computer or mechanical rooms and kitchens is necessary even when the temperature is below freezing. Air conditioning down to 0° F outdoor ambient temperature is possible with the addition of a wind baffle. Whether cooling or heating, the H2i P-Series gives you the flexibility to temper extreme outdoor temperatures.

Warm Air Quickly!
At startup, a special circuit in H2i P-Series quickly delivers refrigerant to the air-conditioning cycle, which rapidly increases the mass flow rate in the system. As a result, air at comfortable temperatures begins flowing from indoor units right away. Even at an outdoor temperature of -13° F, the H2i P-Series system can discharge 100° F temperature air from the indoor units. At 5° F outdoor temperature and above, the discharge temperature reaches an impressive 110° F with a 40° F temperature rise (Indoor Unit Discharge Temperature). This feature translates into a comfortable climate in all zones of a home or office, whether cooling or heating, no matter the temperature outside.

Two in One
If you have a large space such as a long room or hallway which would be considered one zone, two indoor units can be connected to one outdoor unit to cool or heat the space, providing the maximum amount of comfort. The process, in which two indoor units act as one to spread the outdoor unit’s capacity over a large area, is called Twinning.

Published in Mitsubishi
Tuesday, 10 April 2012 16:06

Mitsubishi-Mr. Slim MXZ Multi-Zone Heat Pumps

Multi-Room Wall-mounted INVERTER Heat Pumps

Available in 2-to-1, 3-to-1, 4-to-1 and 8-to-1 indoor units to one outdoor unit systems with wall-mounted and/or ducted indoor unit styles in a wide range of capacities, the MXZ multiroom system has the right solution for your needs.


Multi-zone systems mean that people can enjoy their ideal level of comfort no matter where they are in the home. Each zone (room) operates independently.People in the kitchen, master bedroom or living room can all enjoy the temperatures that makes them feel most comfortable.
If you’re looking for a complete comfort solution for several different rooms, the MXZ multi-zone system is the right choice for you. You can use up to 19different indoor unit combinations so the system is flexible enough to conform to your particular cooling and heating needs with up to four rooms from one outdoor unit. And now with a SEZ ceiling-concealed ducted unit you can enjoy a greater range of zoning options with a MXZ system.

Published in Mitsubishi
Tuesday, 10 April 2012 16:03

Mitsubishi-Mr. Slim P-Series Air Conditioner

The PKA (Cooling Only)
12000 to 34200 Btu/h Capacity

  • INVERTER-driven compressor
  • PKA-HAL/KAL use a wirelesshand-held controller
  • Ideal for applications such as:- Churches, classrooms, day care rooms,out buildings, guard houses and more

    Test conditions are based on AHRI 210/240.
    Specifications are subject to change without notice.
    Limited warranty: Seven-year warranty on compressor. Five-year warranty on parts.

Ultimate Comfort Meets Ultimate Convenience
Select from a wall-mounted, hard-wired controller(PKA-HA/KA) for ultimate comfort control.
The set-temperature display is large and easy to read.Using the 24-hour timer, you can get the unit operationto start and stop at specified times and to repeat daily.And the convenient remote provides easy control ofthe Fan Speed as well as the col, heat, AUTO andDry modes from anywhere in the room.
The hand-held wireless remote controller is easier touse than most TV remotes for the PKA-HA(L)/KA(L).

Lightweight, Easy-to-install Indoor Unit
The smallest PKA unit measures about 36” wide, 11-1/2” tall and 9-3/4”deep. It weighs just 29 lbs., is easily installed above windows or doorways,and can typically be installed by just two licensed installers in abouthalf of a day. And the PKA-Series models don’t even require ductwork,only a small three-inch opening in the wall or ceiling, so they can be installedin some of the toughest spaces, even on brick and masonry walls.

Auto Vane Control
With a simple press of the OFF button, the vane closes the air outlet for aclean presentation when not in use. During operation, the vane can be adjustedwith the remote controller to the perfect position to direct the airflowhorizontally in cooling mode or towards the floor in heating mode, keepingroom temperature even and comfortable.

Published in Mitsubishi

MSY/MUY Wall-mounted INVERTER Air Conditioner Systems
 (7)
Single-Room Wall-Mounted Ductless A/C Lineup (Cooling Only)
(9000 to 34600 Btu/h air conditioners)

  • Mini-Split, ductless air conditioners
  • INVERTER-driven compressor
  • Wireless remote controller
  • WIDE Vane buttom for a wider angle of air flow, 150° from left to right (on GA24/D30/D36 models)

Ideal for applications such as:

  • - Bedrooms, garages and bonus rooms in warm climates
  • Limited warranty: Seven-year warranty on compressor. Five-year warranty on parts.
  • Standard Wall-mounted System Features:

Easy Installation

  • - 3” hole access to connect indoor unit with outdoor unit
  • - Indoor unit powered from three wires connected to outdoor unit
  • - Discreetly mounted high on a wall for out of sight comfort control
  • Catechin and Anti-allergen enzyme filters for high air-purification capabilities
  • “Powerful Mode” function permits system to temporarily run at a lower/higher temperaturewith an increased fan speed, which quickly brings the room to the optimum comfort level
  • Self-check function with onboard diagnostics
  • Advanced microprocessor control
  • Auto restart following a power outage
  • Wireless remote controller
Published in Mitsubishi

Single-Room Wall-Mounted A/C Lineup(Cooling Only)
MS Non- INVERTERAir Conditioners
(9500 to 12000 Btu/h)

  • Available in cooling only
  • Wireless remote controller

Ideal for applications such as

  • - Bedrooms, garages and bonus rooms in warm climates
  • - Video monitoring room
  • Limited warranty: Seven-year warranty on compressor. Five-year warranty on parts.

Standard Wall-mounted System Features:
Easy Installation

  • - 3” hole access to connect indoor unit with outdoor unit
  • - Indoor unit powered from three wires connected to outdoor unit
  • - Discreetly mounted high on a wall for out of sight comfort control
  • Catechin and Anti-allergen enzyme filters for high air-purification capabilities
  • “Powerful Mode” function permits system to temporarily run at a lower/higher temperaturewith an increased fan speed, which quickly brings the room to the optimum comfort level
  • Self-check function with onboard diagnostics
  • Advanced microprocessor control
  • Auto restart following a power outage
  • Wireless remote controller
Published in Mitsubishi
Friday, 06 April 2012 15:46

Freeze Alert - Deluxe Freeze Alarm

  • Automatically calls up to three phone numbers if the temperature gets out of range, the power goes out or if the back-up battery requires replacing.
  • Quick Status CheckTM feature allows you to check the current temperature, power and back-up battery status with a simple, 15 second phone call.
  • Monitors both a high and low temperature set point at the same time making this model perfect for monitoring a deep freezer, walk-in cooler, floral cooler, green house or garage.
  • Pre-Heat or Cool your home, cottage or cabin with a phone call.
  • Purchase our Deluxe Alarm/WaterSiren Package to be alerted by phone of water leaks or flooding.
  • Purchase our Deluxe Alarm/MiniAlarm Motion Sensor Package to alarm intruders and alert you by phone.
  • Back-Up battery keeps the unit operating even during a power failure.
  • Power Out Timer allows you to select the amount of time the power must be out before it calls you with a power out alarm.
  • Wide Temperature Range allows you to monitor any low AND high temperature.
  • Automatically resets when you have acknowledged the alarm and corrected the alarm condition.
  • Remotely change any of the programming options, remotely cancel the alarm call-out and remotely check status via our Quick Status CheckTM feature.
  • Security code prevents unauthorized access.
  • Listen to temperatures in either Fahrenheit or Celsius degrees.
  • No monitoring fees or installation costs (although an HVAC or electrician contractor is recommended if you are installing this to interface with your heating and/or air conditioning system).
Published in Control Products
Friday, 06 April 2012 15:17

Honeywell - TrueZONE Panels

  • Zoning made effortless.
    • Smaller footprint for installation flexibility
    • Push-in terminal blocks, color-coded labels and flexible wire routing can cut installation time in half
    • Illuminated LEDs visually verify heat/cool and stage of equipment
    • 4 models offer up to 4 Zone, 3H/2C operation
    • 5-Year Warranty
Published in Honeywell
Page 8 of 16