Displaying items by tag: Off Peak Heat

Electro-Boiler Industrial Series

•     Large 40 gal. vessel
•     208V/240V/480V/600V, three phase
•     60 - 300 kW
•     Full electronic temperature adjustment
•     Outdoor reset feature included
•     ASME and CSA/UL listed
•     Vessel boasts a large 40-gallon capacity
•     Outdoor reset
•     Disconnect circuit breakers for each heating element
•     Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
•     Compact, can easily fit through service doors
•     No minimum return water temperature required
•     5-year vessel warranty
•     0-10VDC terminal enabling control of boiler via building automation system, etc.
•     Software and interface cable for setup, monitoring, and troubleshooting
•     Circuit breakers, each stage
•     Manual reset hi-limit - 220° F
•     Auto reset limit control - 210° F
•     Low water cut-off with manual reset
•     ASME pressure relief valve, 30 psi
•     Pressure/temperature gauge
•     Drain pipe
•     3” NPT inlet and outlet, with inspection opening
•     Incoloy sheathed heating elements
•     Built-in load management controls, vessel top screw-in
•     Staging indicator lights, at contactor
•     Main supply circuit lugs
•     Safety door interlock and lockable door latch
•     Contains all boiler controls and adjustments
•     Bender fault monitor (optional)
•     Manual reset low water cut-off
•     Hi-limit reset button
•     Temp Sensing & Alarm board
•     T775R controller (optional)
•     Alarm and alarm LED’s
•     Sequencer up to 15 stages
•     Progressive staging delay time

Electro-Boiler TS Series WarmFlo "C"

•     Large 12 gal. vessel
•     208V/240V/480V/600V, three phase
•     240V, single phase
•     18 - 54 kW
•     Full temperature adjustment
•     Outdoor reset feature included
•     Larger physical size than our standard TS series boiler
•     ASME and CSA/UL listed
•     Wall-mounted
•     Vessel boasts a large 13-
•     gallon capacity
•     Outside temperature sensing
•     TS series style cabinet
•     Disconnect circuit breaker included

Electro-Boiler TS Series WarmFlo "W"

•         Standard 7.1 gal. vessel
•         240V, 13 - 27 kW
•         208V, 13 and 27 kW, three phase
•         Full temperature adjustment & modulation
•         Outdoor reset feature included (EB-WO-** model only)
•         Built-in temperature/pressure gauge
•         High Mass/Low Mass element modulation
•         Boiler status panel
•         ASME/CSA US/Canada certification
•         Complete front panel accessibility
•         Dual Boiler option
•         Load Management connection
•         Super quiet operation
•         20-year element/vessel warranty

Electro-Boiler TS Series Staging "S"

•         Standard 7.1 gal. vessel
•         240V, 13 - 27 kW
•         Temperature staging
•         Built-in temperature/pressure gauge
•         High Mass/Low Mass element regulation
•         Boiler status panel
•         ASME/CSA US/Canada certification
•         Complete front panel accessibility
•         Dual Boiler option
•         Load Management connection
•         Super quiet operation
•         20-year element/vessel warranty

Electro-Boiler Midsize Series WarmFlo "MO, MA"

•         Compact, 2.2 gal. vessel
•         240V, 10 - 20 kW
•         Full temperature adjustment and modulation
•         Outdoor reset feature included (EB-MO-** only)
•         Built-in temperature/pressure gauge
•         High Mass/Low Mass element modulation
•         Boiler status panel
•         ASME/CSA US/Canada certification
•         Complete front panel accessibility
•         Dual Boiler option
•         Load Management connection
•         Super quiet operation
•         20-year element/vessel warranty

Electro-Boiler Midsize Series Stage "MS"

•         Compact, 2.2 gal. vessel
•         240V, 10 - 20 kW
•         Temperature staging
•         Built-in temperature/pressure gauge
•         High Mass/Low Mass element regulation
•         Boiler status panel
•         ASME/CSA US/Canada certification
•         Complete front panel accessibility
•         Dual Boiler option
•         Load Management connection
•         Super quiet operation
•         20-year element/vessel warranty

Mini-Boiler WarmFlo

Features include:

•     Compact, 1.1 gal. vessel
•     240V, 4.5 - 9 kW, Temperature Sensing
•     Easy installation
•     WarmFlo sensing technology
•     Built-in pump control relay
•     Pressure temperature gauge
•     Built-in load management
•     Wall-mounted design
•     Two level hi-limit protection-160° pipe protection
•     Quiet operation
•     20-year element/vessel warranty
•     100% efficient

Typical radiant applications include:

•     Multi-zone applications
•     Multi-temperature applications
•     Hot water baseboard/radiator systems
•     In-floor heat - staple-up application
•     Forced air hot water coil
•     Apartments
•     Condo’s
•     Garages
•     Shops
•     Animal Barns
•     Whole house by using one boiler per level
•     Even Bus Shelters....

Mini-Boiler Radiant

• Compact, 1.1 gal. vessel
•     120V, 1 - 5 kW
•     240V, 4.5 - 9 kW

Features include:

•     Built-in temperature pressure gauge
•     Built-in temperature sensor
•     Square D circuit breaker (built-in disconnect circuit breaker)
•     Temperature dial on front cover
•     Indicator lights
•     Easy access control board
•     Compact design, 10-½”W x 8-⅝”D x 25”H
•     100% efficient

Standard equipment:

•     Control wiring terminals
•     DC power relays
•     Hi-limits: 1st - automatic reset, 2nd - manual reset
•     Circulator switching relay - 10-amp maximum
•     Thermostat or end switch connection (R and W)
•     Load management control provisions
•     Heavy duty sheet metal enclosure
•     1 gal. steel vessel, ASME “H” Stamp (20-year warranty)
•     Safety relief valve (30 PSI)
•     Low watt density heating elements (20-year warranty)
•     2-year parts warranty
•     Temperature range 90° F to 160° F
•     ASME/CSA listings
•     Made in the USA

    Typical radiant applications include:

•     Apartments
•     Condo’s
•     Garages
•     Shops
•     Animal Barns
•     Whole house by using one boiler per level
•     Even Bus Shelters....

The Greensource CDi Series SM Model geothermal heat pump split system comes in two parts that can individually replace and work with your existing HVAC system or both can be used in tandem for a full solution. Each come equipped with the quality and innovative technology that only Bosch can provide.

Greensource CDi Series SM Model | Split - Condensing Section

• Versatile and compact design adapts to replacement, relocation, or new construction
• Available hot water generator
• Functional, stylish compact design
• Standard 10 year limited warranty on all parts and labor
• Two-stage scroll compressor operates in harmony with the earth’s temperature extending service life and saving you money
• Advanced controls constantly monitor equipment for reliability and longevity
• Engineered for noise free operation
• Available in both outdoor and indoor models

Greensource CDi Series SM Model | Split - Air Handler Section

• Adaptable for varying installation configurations
• Capable of using 1” or 2” filters
• Condensation overflow protection
• Variable speed ECM blower motor for reduced noise and increased comfort
• Standard 10 year limited warranty on all parts and labor
• Adapts to most existing furnaces

Key Features:

• Tin-Plated Evaporator Air Coil
• Floating Base Pan
• Closed-cell Foam Insulation
• 2 Stage Compressor
• Variable Speed CFM Motor
• Filter Drier
• Easy Access Filter Rack and 2” MERV-8 Filter
• Sloped Stainless Steel Drain Pan
• Thermal Expansion Valve (TXV)
• Air Tight White Pre-painted Steel Cabinets
• Low and High Pressure Switches
• R410-A Refrigerant
• Electronic Circuit Board with Unit Alerts
• Brown Out Protection
• Anti-Short Cycling
• Water Coil/Coaxial Coil/Condenser Freeze Protection

Optional Features

• Cupronickel coaxial heat exchanger
• Internal electric heat
• Dehumidification options
• Domestic hot water heat recovery package

The patented Electro-Mate® zero-clearance electric conversion system converts your existing natural gas, LP, or oil furnace into a “Dual-fuel” (electric/gas-oil) system.  Having this ability to use lower cost electric rates and by using the most cost effective heating source available can save you hundreds of dollars off of your heating bills each year.  With electric’s 100% efficiency you will be able to get an idea of the cost savings available by using electric’s off-peak rates.

All of the Electro-Mates come in upflow and downflow configurations, they simply insert into the plenum above or below your existing furnace.  All thermostat control wiring is simplified and handled within the Electro-Mate.  The Electro-Mate uses the existing blower to distribute the air throughout the home thus saving the need for new air handling equipment.

Typical Applications/Benefits

• Quiet operation with DC relays
• Updating gas or oil furnace to electric
• Variable speed blower connection
• Non-Heat pump conversion
• Energy control selector switch
• Wood backup
• Simple installation
• Quality construction
• Automatic switch to backup during load control
• Advanced safety timers