Displaying items by tag: Ground Source Heat Pump

The Greensource CDi Series SM Model geothermal heat pump comes equipped with Bosch’s commitment to Creative Design and Innovation (CDi for short). The SM Model is our most efficient unit and provides the quality that only Bosch can provide including:

• Up to 37.0 EER (part load) and up to 28.0 EER (full load) GWHP
• Up to 5.2 COP (part load) and up to 5.1 COP (full load) GWHP
• 10 year Parts Limited Warranty
• 10 year Labor Limited Warranty
• White pre-painted sheet metal cabinets
• Two capacity operation with scroll compressor technology
• Constant speed CFM variable speed ECM
• Fiber-free, closed-cell insulation helps to keep the system high efficienct improving your indoor air quality.
• Whisper quiet operation with sound level as low as 52 dB
• Patent-pending floating base pan
• Evaporator coil with tin plated hair pins and aluminum fins for durability and reliability
• LCD display
• Low and high pressure switch protection
• Freeze protection for both evaporator coil and water condenser coil
• Condensate overflow switch protection
• Anti-short cycling
• Brownout/low voltage protection
• Designed with you in mind: fully customizable to meet your individual installation needs with multi-positional configurations
• Combine the Greensource CDi Series SM Model geothermal heat pump with a Bosch innovative thermostat designed to work exclusively with your system
• Stainless steel drainpan
• 2" MERV-11 filter

Optional Features

• Cupronickel coaxial heat exchanger
• Internal electric heat
• Dehumidification options
• Comfort alert diagnostic module
• SmartStart
• Communicating thermostat accessory
• Domestic water heating
• IAQ product accessories

The Greensource CDi Series SM Model geothermal heat pump split system comes in two parts that can individually replace and work with your existing HVAC system or both can be used in tandem for a full solution. Each come equipped with the quality and innovative technology that only Bosch can provide.

Greensource CDi Series SM Model | Split - Condensing Section

• Versatile and compact design adapts to replacement, relocation, or new construction
• Available hot water generator
• Functional, stylish compact design
• Standard 10 year limited warranty on all parts and labor
• Two-stage scroll compressor operates in harmony with the earth’s temperature extending service life and saving you money
• Advanced controls constantly monitor equipment for reliability and longevity
• Engineered for noise free operation
• Available in both outdoor and indoor models

Greensource CDi Series SM Model | Split - Air Handler Section

• Adaptable for varying installation configurations
• Capable of using 1” or 2” filters
• Condensation overflow protection
• Variable speed ECM blower motor for reduced noise and increased comfort
• Standard 10 year limited warranty on all parts and labor
• Adapts to most existing furnaces

Key Features:

• Tin-Plated Evaporator Air Coil
• Floating Base Pan
• Closed-cell Foam Insulation
• 2 Stage Compressor
• Variable Speed CFM Motor
• Filter Drier
• Easy Access Filter Rack and 2” MERV-8 Filter
• Sloped Stainless Steel Drain Pan
• Thermal Expansion Valve (TXV)
• Air Tight White Pre-painted Steel Cabinets
• Low and High Pressure Switches
• R410-A Refrigerant
• Electronic Circuit Board with Unit Alerts
• Brown Out Protection
• Anti-Short Cycling
• Water Coil/Coaxial Coil/Condenser Freeze Protection

Optional Features

• Cupronickel coaxial heat exchanger
• Internal electric heat
• Dehumidification options
• Domestic hot water heat recovery package

• Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent): Closed loop cooling EER - Up to 32.0; Closed loop heating COP - Up to 4.7
• Enjoy the ultra-quiet performance and even-temperature comfort of variable-speed air delivery
• Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
• Superior summer dehumidification
• Smart startup for smoother operation
• Insulated cabinet and compressor blanket for quiet operation
• Wide operating temperature range with exceptional cold weather performance
• Corrosion-resistant coil for durability
• 2" MERV 13 filtration
• 10-year parts and labor limited warranty¹

OPTIONAL FEATURES

• Supplemental, domestic hot water generation
• Internally-mounted auxiliary heat

• Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent):   Closed loop cooling EER - Up to 28.8;  Closed loop heating COP - Up to 4.6
• Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
• Optimal dehumidification capability with the Evolution Connex™ control
• Insulated cabinet and compressor blanket for quiet operation
• Wide operating temperature range with exceptional cold weather performance
• Compatible with a wide range of furnaces and fan coils
• 10-year parts and labor limited warranty¹

OPTIONAL FEATURES

• Supplemental, domestic hot water generation

Water-Source Systems that Simultaneously Cool and Heat or provide Heat Pump Operation

W-Series units combine the convenience of water-source systems with VRFZ technology. These units are easily installed indoors, which means that system performance efficiency is independent of outdoor ambient temperatures. The W-Series includes WR2 models for simultaneous cooling and heating, and WY models as powerful heat pumps.

Now you can control temperature in every room, on every floor, in every building with Mitsubishi Electric’s CITY MULTI systems. It’s an innovative concept that is transforming the way the industry approaches building design, construction, and renovation; it’s based on the understanding that every building has its own unique characteristics and challenges. The CITY MULTI VRFZ building comfort solution gives you the freedom to customize a solution that fits your building like a tailored suit fits a person. As usage patterns and building requirements change, the systems can be adapted to fit these new needs.

W-Series systems from CITY MULTI use water as a heat exchange medium and are intended to be installed inside, rather than outside a building. Zone cooling and heating is controlled by refrigerant piped between water-source unit, BC controller (R2-Series) or manifold (Y-series) and indoor units. W-Series systems can be designed with a wide selection of indoor model configurations and controllers. Indoor units can be monitored and operated individually with remote controllers, up to 50 from one central controller, or up to 2,000 using the TG2000 software. And the CITY MULTI Controls Network (CMCN) integrates with LonWorks® and BACnet® for integrated systems control of the entire building.

Applications include multi-story office buildings, government buildings, military buildings, medical facilities, nursing homes, schools and universities, hotels, resorts, casinos and multi-family dwellings.

Double heat recovery
The double-heat recovery feature of the WR2-Series helps control energy that would normally be rejected to the atmosphere. First, within the system, energy is absorbed in units providing cooling. The energy is redirected by refrigerant to units that are in heating mode. Secondly, energy can be recovered between systems through the water loop. For example, a system providing primarily cooling is rejecting heat to the water loop. This energy could then be utilized by systems providing primarily heating.

Bringing Year-round Comfort Solutions to Extreme Climates
The cooling and heating success of Mitsubishi Electric’s INVERTER heat pump systems is well documented. Our Hyper-Heating INVERTER (H2i) P-Series technology advances the process a step further with the added benefit of year-round comfort with a single system even on the coldest days of the year in most areas. The 2.5- and 3-ton wall-mounted, ceiling-suspended, ceilingcassette and ducted indoor units connected to the H2i P-Series outdoor units are flexible enough to satisfy almost any light commercial or institutional renovation or new construction project.
The Next Generation in Heat Pump Technology
These H2i P-Series outdoor units give a new level of performance to Mitsubishi P-Series models, providing the extra heat-generating power it takes to deliver comfort and consistency in extreme climates. H2i units use Mitsubishi Electric’s INVERTER-driven scroll compressor technology to achieve the desired room temperature quickly, maintaining it consistently while simultaneously conserving energy. Plus with the integration of our exclusive H2i flash technology, these H2i P-Series units recover heat energy that is normally wasted in the flash process at the outdoor coil. This process helps the H2i system overcome issues commonly associated with conventional heat pumps such as decreases in low-side pressure, refrigerant mass flow rate and operational capacity. As a result, H2i P-Series units exhibit 100 percent of rated heating capacity at 5° F and 80 percent at -13° F outdoor ambient temperatures (see Figure 1). Plus they use R410A environmentally friendly refrigerant.

H2i P-Series heat pumps offer a variety of features designed to take the worry out of temperature control such as automatic restart in the case of power outages and automatic cool/heat changeover. And its long line length capabilities of up to 260 ft. expand application possibilities.

Sometimes cooling spaces such as computer or mechanical rooms and kitchens is necessary even when the temperature is below freezing. Air conditioning down to 0° F outdoor ambient temperature is possible with the addition of a wind baffle. Whether cooling or heating, the H2i P-Series gives you the flexibility to temper extreme outdoor temperatures.

Warm Air Quickly!
At startup, a special circuit in H2i P-Series quickly delivers refrigerant to the air-conditioning cycle, which rapidly increases the mass flow rate in the system. As a result, air at comfortable temperatures begins flowing from indoor units right away. Even at an outdoor temperature of -13° F, the H2i P-Series system can discharge 100° F temperature air from the indoor units. At 5° F outdoor temperature and above, the discharge temperature reaches an impressive 110° F with a 40° F temperature rise (Indoor Unit Discharge Temperature). This feature translates into a comfortable climate in all zones of a home or office, whether cooling or heating, no matter the temperature outside.

Two in One
If you have a large space such as a long room or hallway which would be considered one zone, two indoor units can be connected to one outdoor unit to cool or heat the space, providing the maximum amount of comfort. The process, in which two indoor units act as one to spread the outdoor unit’s capacity over a large area, is called Twinning.

Single-Room Wall-Mounted Heat Pump Lineup (cooling and heating)
(9000 to 33200 Btu/h)

• INVERTER-driven compressor
• Provides cooling and heating in a widerange of capacities
• Wireless remote controller
• WIDE Vane bottom for a wider angle of air flow, 150° fromleft to right (on GA24/D30/D36 models)

Ideal for applications such as:

• - Bedrooms, home offices, living rooms,dining rooms, bonus rooms, basements,kitchens, guard houses and more

Easy Installation

• - 3” hole access to connect indoor unit with outdoor unit
• - Indoor unit powered from three wires connected to outdoor unit
• - Discreetly mounted high on a wall for out of sight comfort control
• Catechin and Anti-allergen enzyme filters for high air-purification capabilities
• “Powerful Mode” function permits system to temporarily run at a lower/higher temperaturewith an increased fan speed, which quickly brings the room to the optimum comfort level
• Self-check function with onboard diagnostics
• Advanced microprocessor control
• Auto restart following a power outage
• Wireless remote controller

    HSS® Series
      A NON-PRESSURIZED STAINLESS STEEL BUFFER TANK FOR HYDRONIC HEAT!

•     Available Sizes: HSS-12, HSS-20, HSS-30, HSS-40, HSS-60, HSS-80
•     1 1/4", 1 1/2" or 2" inlet & 3/4" or 1" ball valve outlets
•     Water temperature not to exceed 150 degree max
•     Designed for 6 to 10 gallons per ton of buffer volume
•     115V pump on Hydronic Heat side
•     230V pump with Water side
•     Hydronic pump relay standard sensor for One Stage Heat, Two Stage Heat or Heating & Cooling built in
•     Pump selection based on flow and foot of head per circuit
•     Water side only 3 heat pump circuit max
•     Hydronic 26/99-3 is a three speed pump (low-med-hi)

    QT-EA® Flow Center
      SPECIAL 2 CIRCUIT FLOW CENTER NOW AVAILABLE IN QT SERIES!

The QT-EA Flow Center is designed to provide long, reliable operation in an attractive cabinet, while providing installation and service benefits of the EA KFC. The stylish insulated cabinet provides flexible installation without feeling the need to hide it out of sight.

SIMPLE INSTALLATION
Because the QT-EA Flow Center is completely packaged at the factory, installation is simple. The system should be mounted on the floor. Simply connect a return line from the earth system to the QT-EA Flow Center. Then connect a supply line from the QT-EA to the heat pump unit. That's all there is to adding reliable pump protection to any closed-loop system. Also available is the Flowmeter Tool, an exclusive service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.

    QT® Flow Center
      The QT Flow Center is designed to provide long, reliable operation in an attractive cabinet, while providing installation and service benefits of the GT Flow Center. The stylish rugged insulated cabinet provides for flexible installation without feeling the need to hide it out of sight. The QT Flow Centers are now standard equipment for geoexchange heating and cooling. The QT Flow Center is one of the greatest things to happen to the geoexchange industry.

ONE COMPLETE PACKAGE
The non-pressurized QT Flow Center pumping station is unlike other pump protection devices. For instance, the QT Flow Center includes a built-in pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti-freeze or water, while automatically eliminating air from the closed loop system.

SIMPLE INSTALLATION
As a result of the QT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the QT Flow Center, then connect a supply line from the QT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

The QT Flow Center is designed for years of operation!

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the QT Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.