Displaying items by tag: Ground Source Heat Pump

    Non-Pressurized GT® Flow Center
      THE PRODUCT THAT STARTED IT ALL!

We offer a patented product that has revolutionized the Geothermal world. This single item, the EA FLOW CENTER... made it all possible. From this simple idea arose one of the most remarkable products on the market today.

The patented EA package contains a water vessel with a self-sealing, removable screw-in top, an air-eliminating dip tube on the inlet, a pump protecting check valve on the outlet, pump(s), and ball valves that allow the pump(s) to be removed for service without loss of fluid to the closed loop system. When fluid is circulated through the canister, air is eliminated through the top of the chamber. When the self-sealing top is in place, the top of the chamber acts as an expansion tank. The top remains open until the system is completely filled and purged. Also note that if you are manifolding inside the EA will purge the system. If you plan to manifold outside, you must use a purge cart to clear lines.

Because the EA Flow Center is completely packaged at the factory, installation is simple. The system can be mounted on the floor or wall. Simply connect a return line from the earth System to the EA Flow Center. Then connect a supply line from the EA to the heat pump unit. That's all there is to adding reliable pump protection to any closed loop system. Also available is the Flowmeter Tool (look in accessories), an exclusive B & D Mfg., Inc. service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.

ONE COMPLETE PACKAGE
The non-pressurized GT Flow Center pumping station is unlike other pump protection devices. For instance, the GT Flow Center includes a built-in patented pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti- freeze or water, while automatically eliminating air from the closed-loop system.

SIMPLE INSTALLATION
As a result of the GT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the GT Flow Center, then connect a supply line from the GT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the EA Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.

    Non-Pressurized GT® Flow Center
      THE PRODUCT THAT STARTED IT ALL!

We offer a patented product that has revolutionized the Geothermal world. This single item, the GT FLOW CENTER... made it all possible. From this simple idea arose one of the most remarkable products on the market today. The GT Flow Center is so easy to use that it has been selected for a High School Vocational School teaching program.

The patented GT package contains a water vessel with a self-sealing, removable screw-in top, an air-eliminating dip tube on the inlet, a pump protecting check valve on the outlet, pump(s), and ball valves that allow the pump(s) to be removed for service without loss of fluid to the closed loop system. When fluid is circulated through the canister, air is eliminated through the top of the chamber. When the self-sealing top is in place, the top of the chamber acts as an expansion tank. The top remains open until the system is completely filled and purged. Also note that if you are manifolding inside the GT will purge the system. If you plan to manifold outside, you must use a purge cart to clear lines.

Because the GT Flow Center is completely packaged at the factory, installation is simple. The system can be mounted on the floor or wall. Simply connect a return line from the earth System to the GT Flow Center. Then connect a supply line from the GT to the heat pump unit. That's all there is to adding reliable pump protection to any closed loop system. Also available is the Flowmeter Tool (look in accessories), an exclusive B & D Mfg., Inc. service tool which provides a direct reading of system flow rate, eliminating the uncertainty associated with current methods.

ONE COMPLETE PACKAGE
The non-pressurized GT Flow Center pumping station is unlike other pump protection devices. For instance, the GT Flow Center includes a built-in patented pump protection feature that eliminates the need for a flush cart when filling and flushing a closed-loop system when your manifolds are indoors. And since it is non- pressurized, it allows you to add fluids like anti- freeze or water, while automatically eliminating air from the closed-loop system.

SIMPLE INSTALLATION
As a result of the GT Flow Center being completely packaged at the factory, installation is simple. Just connect the return line from an earth loop to the GT Flow Center, then connect a supply line from the GT to the heat pump unit. Also available is the flow meter tool, an exclusive service tool, which provides a direct reading of system flow rate, and eliminating the uncertainty associated with current methods.

EASY TO OPERATE & MAINTAIN
The system includes a self-sealing feature that keeps dirt & debris out and water in. For you, that means trouble-free operation, easier installation, and fewer call backs. This also means added reliability for the homeowner. In addition, adding anti-freeze is easy, just remove the self-sealing lid and pour it into the air elimination chamber. Since the only moving part of this system are the pump(s), service is minimal. Each part is made to be removed for servicing, without risk of fluid loss or air entry into the system.

A SMART ADDITION TO WATER SOURCE TECHNOLOGY
A homeowner's initial investment in a water source system is slightly more than that of a conventional system. It's an investment that the homeowner will want to protect. Recommending the GT Flow Center will not only add to the reliability of the closed-loop system, it will also add to the customer's satisfaction in the long run.

• Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent):   Closed loop cooling EER - Up to 28.8;  Closed loop heating COP - Up to 4.6
• Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
• Optimal dehumidification capability with the Evolution Connex™ control
• Insulated cabinet and compressor blanket for quiet operation
• Wide operating temperature range with exceptional cold weather performance
• Compatible with a wide range of furnaces and fan coils
• 10-year parts and labor limited warranty¹

OPTIONAL FEATURES

• Supplemental, domestic hot water generation

• Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent): Closed loop cooling EER - Up to 32.0; Closed loop heating COP - Up to 4.7
• Enjoy the ultra-quiet performance and even-temperature comfort of variable-speed air delivery
• Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort 
• Superior summer dehumidification
• Smart startup for smoother operation
• Insulated cabinet and compressor blanket for quiet operation
• Wide operating temperature range with exceptional cold weather performance
• Corrosion-resistant coil for durability
• 2" MERV 13 filtration
• 10-year parts and labor limited warranty¹

OPTIONAL FEATURES

• Supplemental, domestic hot water generation
• Internally-mounted auxiliary heat

The Greensource CDi Series SM Model geothermal heat pump split system comes in two parts that can individually replace and work with your existing HVAC system or both can be used in tandem for a full solution. Each come equipped with the quality and innovative technology that only Bosch can provide.

Greensource CDi Series SM Model | Split - Condensing Section

• Versatile and compact design adapts to replacement, relocation, or new construction
• Available hot water generator
• Functional, stylish compact design
• Standard 10 year limited warranty on all parts and labor
• Two-stage scroll compressor operates in harmony with the earth’s temperature extending service life and saving you money
• Advanced controls constantly monitor equipment for reliability and longevity
• Engineered for noise free operation
• Available in both outdoor and indoor models

Greensource CDi Series SM Model | Split - Air Handler Section

• Adaptable for varying installation configurations
• Capable of using 1” or 2” filters
• Condensation overflow protection
• Variable speed ECM blower motor for reduced noise and increased comfort
• Standard 10 year limited warranty on all parts and labor
• Adapts to most existing furnaces

Key Features:

• Tin-Plated Evaporator Air Coil
• Floating Base Pan
• Closed-cell Foam Insulation
• 2 Stage Compressor
• Variable Speed CFM Motor
• Filter Drier
• Easy Access Filter Rack and 2” MERV-8 Filter
• Sloped Stainless Steel Drain Pan
• Thermal Expansion Valve (TXV)
• Air Tight White Pre-painted Steel Cabinets
• Low and High Pressure Switches
• R410-A Refrigerant
• Electronic Circuit Board with Unit Alerts
• Brown Out Protection
• Anti-Short Cycling
• Water Coil/Coaxial Coil/Condenser Freeze Protection

Optional Features

• Cupronickel coaxial heat exchanger
• Internal electric heat
• Dehumidification options
• Domestic hot water heat recovery package

The Greensource CDi Series SM Model geothermal heat pump comes equipped with Bosch’s commitment to Creative Design and Innovation (CDi for short). The SM Model is our most efficient unit and provides the quality that only Bosch can provide including:

• Up to 37.0 EER (part load) and up to 28.0 EER (full load) GWHP
• Up to 5.2 COP (part load) and up to 5.1 COP (full load) GWHP
• 10 year Parts Limited Warranty
• 10 year Labor Limited Warranty
• White pre-painted sheet metal cabinets
• Two capacity operation with scroll compressor technology
• Constant speed CFM variable speed ECM
• Fiber-free, closed-cell insulation helps to keep the system high efficienct improving your indoor air quality.
• Whisper quiet operation with sound level as low as 52 dB
• Patent-pending floating base pan
• Evaporator coil with tin plated hair pins and aluminum fins for durability and reliability
• LCD display
• Low and high pressure switch protection
• Freeze protection for both evaporator coil and water condenser coil
• Condensate overflow switch protection
• Anti-short cycling
• Brownout/low voltage protection
• Designed with you in mind: fully customizable to meet your individual installation needs with multi-positional configurations
• Combine the Greensource CDi Series SM Model geothermal heat pump with a Bosch innovative thermostat designed to work exclusively with your system
• Stainless steel drainpan
• 2" MERV-11 filter

Optional Features

• Cupronickel coaxial heat exchanger
• Internal electric heat
• Dehumidification options
• Comfort alert diagnostic module
• SmartStart
• Communicating thermostat accessory
• Domestic water heating
• IAQ product accessories