Electric Heat - Freetly Electric

Wednesday, 04 April 2012 16:13

Bryant-GT Preferred Variable-Speed Geothermal Heat Pump

Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent): Closed loop cooling EER - Up to 32.0; Closed loop heating COP - Up to 4.7
Enjoy the ultra-quiet performance and even-temperature comfort of variable-speed air delivery
Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort
Superior summer dehumidification
Smart startup for smoother operation
Insulated cabinet and compressor blanket for quiet operation
Wide operating temperature range with exceptional cold weather performance
Corrosion-resistant coil for durability
2" MERV 13 filtration
10-year parts and labor limited warranty¹

OPTIONAL FEATURES

Supplemental, domestic hot water generation
Internally-mounted auxiliary heat

¹To the original owner, when installed in a residence, a 10-year parts and labor limited warranty upon timely registration of equipment. Warranty period is 10 years on parts and 5 years on labor if not registered within 90 days of installation. Original owners residing in jurisdictions that prohibit warranty benefits conditioned on registration will automatically receive a 10-year parts and labor limited warranty. See warranty certificate for details.

Published in Bryant

Wednesday, 04 April 2012 16:13

Bryant-GZ Preferred Split system Indoor Geothermal Heat Pump

Manage your utility costs with high-efficiency comfort (efficiency is unit size dependent): Closed loop cooling EER - Up to 28.8; Closed loop heating COP - Up to 4.6
Two-stage scroll compressor operation allows longer, more consistent cycles in lower stage for savings and comfort
Optimal dehumidification capability with the Evolution Connex™ control
Insulated cabinet and compressor blanket for quiet operation
Wide operating temperature range with exceptional cold weather performance
Compatible with a wide range of furnaces and fan coils
10-year parts and labor limited warranty¹

OPTIONAL FEATURES

Supplemental, domestic hot water generation

1. To the original owner, when installed in a residence, a 10-year parts and labor limited warranty upon timely registration of equipment. Warranty period is 10 years on parts and 5 years on labor if not registered within 90 days of installation. Original owners residing in jurisdictions that prohibit warranty benefits conditioned on registration will automatically receive a 10-year parts and labor limited warranty. See warranty certificate for details.

Published in Bryant

Wednesday, 04 April 2012 16:13

Mitsubishi-City Multi WR2 Series Heat Recovery System

Water-Source Systems that Simultaneously Cool and Heat or provide Heat Pump Operation

W-Series units combine the convenience of water-source systems with VRFZ technology. These units are easily installed indoors, which means that system performance efficiency is independent of outdoor ambient temperatures. The W-Series includes WR2 models for simultaneous cooling and heating, and WY models as powerful heat pumps.

Now you can control temperature in every room, on every floor, in every building with Mitsubishi Electric’s CITY MULTI systems. It’s an innovative concept that is transforming the way the industry approaches building design, construction, and renovation; it’s based on the understanding that every building has its own unique characteristics and challenges. The CITY MULTI VRFZ building comfort solution gives you the freedom to customize a solution that fits your building like a tailored suit fits a person. As usage patterns and building requirements change, the systems can be adapted to fit these new needs.

W-Series systems from CITY MULTI use water as a heat exchange medium and are intended to be installed inside, rather than outside a building. Zone cooling and heating is controlled by refrigerant piped between water-source unit, BC controller (R2-Series) or manifold (Y-series) and indoor units. W-Series systems can be designed with a wide selection of indoor model configurations and controllers. Indoor units can be monitored and operated individually with remote controllers, up to 50 from one central controller, or up to 2,000 using the TG2000 software. And the CITY MULTI Controls Network (CMCN) integrates with LonWorks® and BACnet® for integrated systems control of the entire building.

Applications include multi-story office buildings, government buildings, military buildings, medical facilities, nursing homes, schools and universities, hotels, resorts, casinos and multi-family dwellings.

Double heat recovery
The double-heat recovery feature of the WR2-Series helps control energy that would normally be rejected to the atmosphere. First, within the system, energy is absorbed in units providing cooling. The energy is redirected by refrigerant to units that are in heating mode. Secondly, energy can be recovered between systems through the water loop. For example, a system providing primarily cooling is rejecting heat to the water loop. This energy could then be utilized by systems providing primarily heating.

Published in Mitsubishi

Wednesday, 04 April 2012 13:30

Bryant - 225B

STANDARD FEATURES

Energy Efficiency
14.5-15 SEER / 11.7-13 EER / 7.7-9 HSPF

New Aesthetic Design
DuraGuard™ System Baked-on powder paint
Steel-louver Coil Guard

Quiet Operation
Sound as low as 74 dBA

Reliability, Quality and Durability

Scroll Compressor
Field-installed Filter Drier
Front-seating Service Valves
High-Pressure Switch
Loss-of-Charge Switch
Internal Pressure-Relief Valve
Internal thermal overload

Published in Bryant

Wednesday, 04 April 2012 13:19

Bryant - 285B

Features:

Efficiency

15.3 SEER (nominal) / 11.0-- 13.0 EER / 7.7 -- 8.0 HSPF
Microtube Technologyt refrigeration system
Indoor air quality accessories available

Sound

Sound level as low as 68 dBA
Compressor sound blanket standard
Quiet shift defrost

Comfort

System supports Evolution Control or standard thermostat controls

Reliability

Puron refrigerant -- environmentally sound, won’t deplete the ozone layer and low lifetime servce cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
High pressure switches
Loss--of--charge switch
Balanced refrigeration system for maximum reliability

Durability

DuraGuardt protection package:
Solid, durable sheet metal construction
Louvered coil guard
Baked--on, complete outer coverage, powder paint

Applications

Long--line -- up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
Low ambient (down to --20_F/--28.9_C)) with accessory kit

Published in Bryant

Wednesday, 04 April 2012 12:59

Bryant - 280A

Standard Features

Energy Efficiency

Up to 20.5 SEER / 13.0 HSPF

Durability

DuraGuard™ protection package
Steel-louver coil guard
Solid, durable sheet metal construction

Sound

Sound level as low as 58 dBA

Comfort

Variable speed compressor with capacity range as wide as 40-100%
Air cooled Inverter variable speed drive
System required Evolution Control (SYSTXBBUID01-D or SYSTXBBUIZ01-D software version 23 or newer)

Reliability

High-pressure switch
Internal crankcase heater standard
Evolution Extreme Intelligence actively monitors critical system parameters
Electronic expansion valve (EXV) for heating
Suction pressure transducer
Filter drier and External muffler (field installed)

Flexibility and installation

2 control wires to outdoor unit
Minimum and maximum airflow adjustments
Compressor heating RPM control

Applications/Serviceability

Long-line - up to 250 ft total equivalent length, up to 200 ft condenser above evaporator, or up to 80 ft evaporator above condenser

Published in Bryant

Tuesday, 03 April 2012 16:46

Electro Industries-Industrial Series

Electro-Boiler Industrial Series

Large 40 gal. vessel
208V/240V/480V/600V, three phase
60 - 300 kW
Full electronic temperature adjustment
Outdoor reset feature included
ASME and CSA/UL listed
Vessel boasts a large 40-gallon capacity
Outdoor reset
Disconnect circuit breakers for each heating element
Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
Compact, can easily fit through service doors
No minimum return water temperature required
5-year vessel warranty
0-10VDC terminal enabling control of boiler via building automation system, etc.
Software and interface cable for setup, monitoring, and troubleshooting
Circuit breakers, each stage
Manual reset hi-limit - 220° F
Auto reset limit control - 210° F
Low water cut-off with manual reset
ASME pressure relief valve, 30 psi
Pressure/temperature gauge
Drain pipe
3” NPT inlet and outlet, with inspection opening
Incoloy sheathed heating elements
Built-in load management controls, vessel top screw-in
Staging indicator lights, at contactor
Main supply circuit lugs
Safety door interlock and lockable door latch
Contains all boiler controls and adjustments
Bender fault monitor (optional)
Manual reset low water cut-off
Hi-limit reset button
Temp Sensing & Alarm board
T775R controller (optional)
Alarm and alarm LED’s
Sequencer up to 15 stages
Progressive staging delay time